Quote Successfully Submitted
8'x8' Gable Shed - Install or Do It Yourself?
Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.
A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.
Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.
3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.
Cinder blocks and gravel are available for your convenience.
Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.
Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.
Shingle, Drip Edge & Roof Vent Colour
Teardown and Removal
Select the type of shed you currently have that needs to be torn down and removed.
Please attach at least 3 to 4 exterior and interior photos of your pre-existing shed that requires teardown and removal.
Please provide us with a short description of your pre-existing shed that you’d like to have torn down and removed, including the size (length, width & height).
Please note we do not do teardowns with finished interior walls, finished floors, or insulated walls. These would need to be removed and discarded for Shed In A Day to teardown and remove the actual shed.
Accessories
Our 400 lumen 80 LED interior solar light illuminates the inside of your shed with motion detection or with the flick of a switch using the power of the sun. Includes the ability to charge even during unfavorable cloudy conditions to ensure lasting longevity. Includes a rechargeable battery and a roof mounted solar panel. The solar panel is water-resistant so you can ensure it will withstand the elements. A subtle wire connects the solar panel into the shed.
Our exterior solar floodlights use the power of the sun to charge the battery to produce ultra powerful outside light with a motion sensor. Available in three models with different brightness and mounting options. Includes a rechargeable battery. The roof mounted solar panel is water-resistant to ensure the solar panel will withstand the elements.
Construction Upgrades (65-100 sq ft)
We offer a 16” centered wall stud upgrade from our standard 24” centered wall studs. This upgrade is recommended if you’d like to hang heavy items on the interior wall studs.
You can increase the height of your shed walls from our standard 72” side wall height up to a height of: 78”, 84”, 88” or 96”.
Click Here for Full Shed Height Information
We offer 16” centered roof trusses as an upgrade from our standard 24” centered roof trusses.
We offer 1/2" spruce plywood roof sheeting, which is an alternative to our standard 7/16” OSB roof sheeting.
- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge
- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge
- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge
- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge
Select this option if you’d like to add an interior wall to your shed. The interior wall is framed and one side is finished with Smart Side Paneling which is the same material as the exterior shed walls. The interior wall is constructed from the floor to ceiling. Ideal for change rooms, outdoor lockers or any need you have to divide the interior of your shed. The wall will run parallel with the front and rear of your shed. Please note, with this option you will need to add an additional door(s) for access from the exterior to interior of the shed.
We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.
We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.
We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.
We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.
We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.
We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.
Construction Upgrades (0-64 sq ft)
We offer 1/2" spruce plywood roof sheeting, which is an alternative to our standard 7/16” OSB roof sheeting.
Our Single Slope flashing is ideal for sheds that are against a house or other structure. The metal flashing will seal the space between your house and the shed and prevent moisture from collecting behind the shed.
Our Single Slope flashing is ideal for sheds that are against a house or other structure. The metal flashing will seal the space between your house and the shed and prevent moisture from collecting behind the shed.
Construction Upgrades (151-180 sq ft)
We offer a 16” centered wall stud upgrade from our standard 24” centered wall studs. This upgrade is recommended if you’d like to hang heavy items on the interior wall studs.
You can increase the height of your shed walls from our standard 72” side wall height up to a height of: 78”, 84”, 88” or 96”.
Click Here for Full Shed Height Information
We offer 16” centered roof trusses as an upgrade from our standard 24” centered roof trusses.
We offer 1/2" spruce plywood roof sheeting, which is an alternative to our standard 7/16” OSB roof sheeting.
- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge
Select this option if you’d like to add an interior wall to your shed. The interior wall is framed and one side is finished with Smart Side Paneling which is the same material as the exterior shed walls. The interior wall is constructed from the floor to ceiling. Ideal for change rooms, outdoor lockers or any need you have to divide the interior of your shed. The wall will run parallel with the front and rear of your shed. Please note, with this option you will need to add an additional door(s) for access from the exterior to interior of the shed.
We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.
We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.
Flooring Options (65-100 sq ft)
Our sheds come standard with 5/8” OSB tongue and groove floor sheeting. Select this option to upgrade to either 5/8” pressure treated plywood flooring or 3/4” pressure treated plywood flooring. This upgrade is highly recommended since the floor experiences the most wear and tear.
Our shed floors are built standard with 24” centered floor joists. 24” centered floor joists for example are ideal for withstanding weights inside the shed such as: a push lawn mower, bicycles and patio furniture. 16” Centered Floor Joists are recommended for storing weights such as: winter tires, electric scooters, small riding mowers and pool pumps. 12” Centered Floor Joists is our strongest floor joist configuration which is recommended for storing weights such as: an ATV, a motorcycle, a large riding mower, heavy tool boxes, files, or to set up your shed as a shop or office.
Our sheds come standard with 2"x6" pressure treated floor joists. Upgrading to 2"x8" floor joists is ideal for storing anything exceedingly heavy.
We offer floor insulation including 1/2” pressure treated plywood on the bottom, R22 6” Rockwool insulation centered in the middle and floor sheeting on top. Please note, this upgrade can only be installed before the walls are installed. We do not offer wall or ceiling insulation; we simply offer the flooring insulation since it can only be done once when the shed is being built.
We offer floor joist hangers to help reinforce the floor to provide optimal strength. Adding floor joist hangers to each floor joist ensures maximum reinforcement so you can store weights such as: ATV's, heavy lawn tractors, motorcycles, rolling toolboxes and to set up your shed as a shop or office.
Select this option if you would like to add ground anchors to your shed. We use 36" double disc steel anchors to attach the four corners of your shed to the ground. Please note, this upgrade is not required in most situations.
Select this option if you would like to add a sill plate gasket seal with exterior base caulking to keep the moisture out.
Please see below for our recommended concrete pad sizes for building your shed on a concrete pad. The shed footprint is the actual size of our shed floors. The recommended pad size is 1/2" smaller than the footprint size since this allows the walls to hang 1/4" over the pad so the rain flows off the walls and away from the pad. Any pad size that is at least the recommended size or larger will also work no problem for building our sheds. It is critical that your concrete pad is both level and square in order for it to be constructed correctly. Many contractors will want to add a small slope to your pad so please make sure to mention that is must be level and square with no slope to ensure your new shed can be built properly. Please note, we do not pour concrete pads ourselves; however your shed can be built on a pre-existing pad or one that you have poured.
Flooring Options (101-150 sq ft)
Our sheds come standard with 5/8” OSB tongue and groove floor sheeting. Select this option to upgrade to either 5/8” pressure treated plywood flooring or 3/4” pressure treated plywood flooring. This upgrade is highly recommended since the floor experiences the most wear and tear.
Our shed floors are built standard with 24” centered floor joists. 24” centered floor joists for example are ideal for withstanding weights inside the shed such as: a push lawn mower, bicycles and patio furniture. 16” Centered Floor Joists are recommended for storing weights such as: winter tires, electric scooters, small riding mowers and pool pumps. 12” Centered Floor Joists is our strongest floor joist configuration which is recommended for storing weights such as: an ATV, a motorcycle, a large riding mower, heavy tool boxes, files, or to set up your shed as a shop or office.
Our sheds come standard with 2"x6" pressure treated floor joists. Upgrading to 2"x8" floor joists is ideal for storing anything exceedingly heavy.
We offer floor insulation including 1/2” pressure treated plywood on the bottom, R22 6” Rockwool insulation centered in the middle and floor sheeting on top. Please note, this upgrade can only be installed before the walls are installed. We do not offer wall or ceiling insulation; we simply offer the flooring insulation since it can only be done once when the shed is being built.
We offer floor joist hangers to help reinforce the floor to provide optimal strength. Adding floor joist hangers to each floor joist ensures maximum reinforcement so you can store weights such as: ATV's, heavy lawn tractors, motorcycles, rolling toolboxes and to set up your shed as a shop or office.
Select this option if you would like to add ground anchors to your shed. We use 36" double disc steel anchors to attach the four corners of your shed to the ground. Please note, this upgrade is not required in most situations.
Select this option if you would like to add a sill plate gasket seal with exterior base caulking to keep the moisture out.
Please see below for our recommended concrete pad sizes for building your shed on a concrete pad. The shed footprint is the actual size of our shed floors. The recommended pad size is 1/2" smaller than the footprint size since this allows the walls to hang 1/4" over the pad so the rain flows off the walls and away from the pad. Any pad size that is at least the recommended size or larger will also work no problem for building our sheds. It is critical that your concrete pad is both level and square in order for it to be constructed correctly. Many contractors will want to add a small slope to your pad so please make sure to mention that is must be level and square with no slope to ensure your new shed can be built properly. Please note, we do not pour concrete pads ourselves; however your shed can be built on a pre-existing pad or one that you have poured.
Door Options & Location (6' Front)
Included Door Options & Location
Pictured above is our standard door location for our 6' front bin and bike mini shed with 48" double wooden doors.
Select this option if you’d like reverse our standard bin & bike mini shed slope to have the tall wall at the front and the shorter wall at the rear. The price includes the cost to move the doors and also decorative trim for the new front of the shed.
Because you have selected a reverse slope you can upgrade the height of our standard wooden doors. The height can be increased depending on the depth of the shed. If 2' deep you can increase by 6" from 46" to 52". If 3' deep you can increase by 11" from 46" to 57". If 4' deep you can increase by 15" from 46" to 61". If 5' deep you can increase by 18" from 46" to 64".
Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.
Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.
Door Options & Location (9' Front)
Included Door Options & Location
Pictured above is our standard door location for our 9' front gable shed with the included 60" double wooden doors.
Select this option if you would like to upgrade the included 60" double wooden doors. Options include: a 36" single wooden door, 72" double wooden doors, a 36" metal door and a roll up door.
This shed will include 60" double wooden doors on the 9' front wall of the shed. Select this option to move the doors to the side walls of the shed.
You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".
Select if you would like the hinge on the left or right side of the door when looking at the door from the outside of the shed.
Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.
Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.
Additional Door or Set of Doors Options & Location
Select the below options if you would like to add a second door or set of doors to your shed.
Your shed includes one door or set of doors. Select this option if you would like to add a second door or set of doors to your shed.
Where would you like the additional door or set of doors to be located on your shed?
Select if you would like the hinge on the left or right side of the additional door when looking at the door from the outside of the shed.
You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".
Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.
Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.
Door Options & Location (6' Front)
Included Door Options & Location
Pictured above is our standard door location for our 6' front gable shed with the included 30" single wooden door.
Select this option if you would like to upgrade the included single 30" wooden door. Options include: a 36" single wooden door, 48", 60" and 72" double wooden doors, a 36" metal door and a roll up door. Please note that all door sizes may not be available depending on your shed size.
This shed will include a 30" single wooden door on the 6' front wall of the shed. Select this option to move the door to the side walls of the shed.
You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".
Select if you would like the hinge on the left or right side of the door when looking at the door from the outside of the shed.
Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.
Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.
Additional Door or Set of Doors Options & Location
Select the below options if you would like to add a second door or set of doors to your shed.
Your shed includes one door or set of doors. Select this option if you would like to add a second door or set of doors to your shed. Please note that all door sizes may not be available depending on your shed size.
Where would you like the additional door or set of doors to be located on your shed?
Select if you would like the hinge on the left or right side of the additional door when looking at the door from the outside of the shed.
You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".
Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.
Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.
Painted Bin & Bike Mini Shed w/ Installation Pricing & Quote
Special Offer Includes:
- Full Professional Installation
- Full Paint Job (Abyss Black w/ White Trim)
- Shed Foundation Levelling up to 8"
- Wooden Floor (Pressure treated 2"x6" frame on 24" centres, 5/8" OSB sheeting, upgrades available)
- 60″w x 46"h double wooden doors (two 30″ wide single doors that open outwards)
- Shingles & Drip Edge
- Full 3 Year Structural Warranty
- Also available as an 8'x4' for $1699
Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.
Construction Upgrades (101-150 sq ft)
We offer a 16” centered wall stud upgrade from our standard 24” centered wall studs. This upgrade is recommended if you’d like to hang heavy items on the interior wall studs.
You can increase the height of your shed walls from our standard 72” side wall height up to a height of: 78”, 84”, 88” or 96”.
Click Here for Full Shed Height Information
We offer 16” centered roof trusses as an upgrade from our standard 24” centered roof trusses.
We offer 1/2" spruce plywood roof sheeting, which is an alternative to our standard 7/16” OSB roof sheeting.
- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge
- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge
- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge
- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge
Select this option if you’d like to add an interior wall to your shed. The interior wall is framed and one side is finished with Smart Side Paneling which is the same material as the exterior shed walls. The interior wall is constructed from the floor to ceiling. Ideal for change rooms, outdoor lockers or any need you have to divide the interior of your shed. The wall will run parallel with the front and rear of your shed. Please note, with this option you will need to add an additional door(s) for access from the exterior to interior of the shed.
We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.
We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.
We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.
We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.
Flooring Options (0-64 sq ft)
Our sheds come standard with 5/8” OSB Tongue and Groove Floor Sheeting. Select this option to upgrade to either 5/8” LP ProStruct with SmartFinish Treated Flooring or 3/4” Pressure Treated Plywood Flooring. This upgrade is highly recommended since the floor experiences the most wear and tear.
Our shed floors are built standard with 24” centered floor joists. 24” centered floor joists for example are ideal for withstanding weights inside the shed such as: a push lawn mower, bicycles and patio furniture. 16” Centered Floor Joists are recommended for storing weights such as: winter tires, electric scooters, small riding mowers and pool pumps. 12” Centered Floor Joists is our strongest floor joist configuration which is recommended for storing weights such as: an ATV, a motorcycle, a large riding mower, heavy tool boxes, files, or to set up your shed as a shop or office.
Our sheds come standard with 2"x6" pressure treated floor joists. Upgrading to 2"x8" floor joists is ideal for storing anything exceedingly heavy.
We offer floor joist hangers to help reinforce the floor to provide optimal strength. Adding floor joist hangers to each floor joist ensures maximum reinforcement so you can store weights such as: ATV's, heavy lawn tractors, motorcycles, rolling toolboxes and to set up your shed as a shop or office.
Our decorative lattice shed skirt can be added around the base of your shed where the foundation rises from the ground.
Note: Shed skirt does not include stones.
Select this option if you would like to add a sill plate gasket seal with exterior base caulking to keep the moisture out.
Please see below for our recommended concrete pad sizes for building your shed on a concrete pad. The shed footprint is the actual size of our shed floors. The recommended pad size is 1/2" smaller than the footprint size since this allows the walls to hang 1/4" over the pad so the rain flows off the walls and away from the pad. Any pad size that is at least the recommended size or larger will also work no problem for building our sheds. It is critical that your concrete pad is both level and square in order for it to be constructed correctly. Many contractors will want to add a small slope to your pad so please make sure to mention that is must be level and square with no slope to ensure your new shed can be built properly. Please note, we do not pour concrete pads ourselves; however your shed can be built on a pre-existing pad or one that you have poured.
Door Options & Location (10' Front)
Included Door Options & Location
Pictured above is our standard door location for our 10' front gable shed with the included 60" double wooden doors.
Select this option if you would like to upgrade the included 60" double wooden doors. Options include: a 36" single wooden door, 72" double wooden doors, a 36" metal door and a roll up door.
This shed will include 60" double wooden doors on the 10' front wall of the shed. Select this option to move the doors to the side walls of the shed.
You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".
Select if you would like the hinge on the left or right side of the door when looking at the door from the outside of the shed.
Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.
Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.
Additional Door or Set of Doors Options & Location
Select the below options if you would like to add a second door or set of doors to your shed.
Your shed includes one door or set of doors. Select this option if you would like to add a second door or set of doors to your shed.
Where would you like the additional door or set of doors to be located on your shed?
Select if you would like the hinge on the left or right side of the additional door when looking at the door from the outside of the shed.
You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".
Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.
Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.
Flooring Options (150-180 sq ft)
Our sheds come standard with 5/8” OSB tongue and groove floor sheeting. Select this option to upgrade to either 5/8” pressure treated plywood flooring or 3/4” pressure treated plywood flooring. This upgrade is highly recommended since the floor experiences the most wear and tear.
Our shed floors are built standard with 24” centered floor joists. 24” centered floor joists for example are ideal for withstanding weights inside the shed such as: a push lawn mower, bicycles and patio furniture. 16” Centered Floor Joists are recommended for storing weights such as: winter tires, electric scooters, small riding mowers and pool pumps. 12” Centered Floor Joists is our strongest floor joist configuration which is recommended for storing weights such as: an ATV, a motorcycle, a large riding mower, heavy tool boxes, files, or to set up your shed as a shop or office.
Our sheds come standard with 2"x6" pressure treated floor joists. Upgrading to 2"x8" floor joists is ideal for storing anything exceedingly heavy.
We offer floor insulation including 1/2” pressure treated plywood on the bottom, R22 6” Rockwool insulation centered in the middle and floor sheeting on top. Please note, this upgrade can only be installed before the walls are installed. We do not offer wall or ceiling insulation; we simply offer the flooring insulation since it can only be done once when the shed is being built.
We offer floor joist hangers to help reinforce the floor to provide optimal strength. Adding floor joist hangers to each floor joist ensures maximum reinforcement so you can store weights such as: ATV's, heavy lawn tractors, motorcycles, rolling toolboxes and to set up your shed as a shop or office.
Select this option if you would like to add ground anchors to your shed. We use 36" double disc steel anchors to attach the four corners of your shed to the ground. Please note, this upgrade is not required in most situations.
Select this option if you would like to add a sill plate gasket seal with exterior base caulking to keep the moisture out.
Please see below for our recommended concrete pad sizes for building your shed on a concrete pad. The shed footprint is the actual size of our shed floors. The recommended pad size is 1/2" smaller than the footprint size since this allows the walls to hang 1/4" over the pad so the rain flows off the walls and away from the pad. Any pad size that is at least the recommended size or larger will also work no problem for building our sheds. It is critical that your concrete pad is both level and square in order for it to be constructed correctly. Many contractors will want to add a small slope to your pad so please make sure to mention that is must be level and square with no slope to ensure your new shed can be built properly. Please note, we do not pour concrete pads ourselves; however your shed can be built on a pre-existing pad or one that you have poured.
Door Options & Location (8' Front)
Included Door Options & Location
Pictured above is our standard door locations for our 8' front bin and bike mini shed with 60" double wooden doors.
Select this option if you’d like reverse our standard bin & bike mini shed slope to have the tall wall at the front and the shorter wall at the rear. The price includes the cost to move the doors and also decorative trim for the new front of the shed.
Because you have selected a reverse slope you can upgrade the height of our standard wooden doors. The height can be increased depending on the depth of the shed. If 2' deep you can increase by 6" from 46" to 52". If 3' deep you can increase by 11" from 46" to 57". If 4' deep you can increase by 15" from 46" to 61". If 5' deep you can increase by 18" from 46" to 64".
Select this option if you would like to upgrade the included 60" wide x 46" tall double wooden doors to 72" wide x 46" tall double wooden doors.
Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.
Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.
Customer Information & Submit Quote
The final estimated price is :
Please select your delivery location. If your location is not on the list please select "Other Area" and you can specify your location below.
Deliveries over 2.5 hours based on Google Maps from Dundas is a $50 surcharge.
Deliveries over 3 hours based on Google Maps from Dundas is a $100 surcharge.
Please specify the city or town you require delivery to.
If you have any questions or concerns about where you would like your shed built, please attach a few photos of the area you would like it located.
Quote Summary
Description | Information | Quantity | Price |
---|---|---|---|
Discount : | |||
Total : |