Our pricing & quote form may take a few moments to load. Please note that this form is for shed pricing and quote requests. We will email a full quote with all pricing and ordering information.

Get Started

Quote Successfully Submitted

10'x10' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

Flooring Options (65-100 sq ft)

Select if you would like your shed to be built on a wooden floor. The wooden floor is included in the price of the shed. You can also select if you would like your shed to be built on a pre-existing concrete pad that you currently have or plan to have poured. If you select this option you will receive a credit back for not requiring a wooden floor.




Our sheds come standard with 5/8” OSB Tongue and Groove Floor Sheeting. Select this option to upgrade to either 5/8” LP ProStruct with SmartFinish Treated Flooring or 3/4” Pressure Treated Plywood Flooring. This upgrade is highly recommended since the floor experiences the most wear and tear.


Our shed floors are built standard with 24” centered floor joists. 24” centered floor joists for example are ideal for withstanding weights inside the shed such as: a push lawn mower, bicycles and patio furniture. 16” Centered Floor Joists are recommended for storing weights such as: winter tires, electric scooters, small riding mowers and pool pumps. 12” Centered Floor Joists is our strongest floor joist configuration which is recommended for storing weights such as: an ATV, a motorcycle, a large riding mower, heavy tool boxes, files, or to set up your shed as a shop or office.


Our sheds come standard with 2"x6" pressure treated floor joists. Upgrading to 2"x8" floor joists is ideal for storing anything exceedingly heavy.


We offer floor joist hangers to help reinforce the floor to provide optimal strength. Adding floor joist hangers to each floor joist ensures maximum reinforcement so you can store weights such as: ATV's, heavy lawn tractors, motorcycles, rolling toolboxes and to set up your shed as a shop or office.


We offer floor insulation including 1/2” pressure treated plywood on the bottom, R22 6” Rockwool insulation centered in the middle and floor sheeting on top. Please note, this upgrade can only be installed before the walls are installed. We do not offer wall or ceiling insulation; we simply offer the flooring insulation since it can only be done once, when the shed is being built.

Please Note: Insulated floors are only built with 16” Floor Joist Centers, Pressure Treated 2x6 Floor Joists and 5/8” or ¾” Pressure Treated Plywood (Joist Hangers are not required with an insulated floor), if you have selected Insulated Floor, if needed we will change the quote to this configuration. It is also recommended to select Metal Doors with the insulated floor as they have a seal to hold the heat or A/C if you are planning to heat or cool your shed, our Wooden Doors have no seals. If you are upgrading to Metal Doors you will also have to select Upgrade Wall Height to 88” so as the door will fit on the Barn Shed, located in “Construction Upgrades” next section.


Our decorative lattice shed skirt can be added around the base of your shed where the foundation rises from the ground.
Note: Shed skirt does not include stones.



Select this option if you would like to add ground anchors to your shed. We use 36" double disc steel anchors to attach the four corners of your shed to the ground. Please note, this upgrade is not required in most situations.


Select this option if you would like to add a sill plate gasket seal with exterior base caulking to keep the moisture out.

Please see below for our recommended concrete pad sizes for building your shed on a concrete pad. The shed footprint is the actual size of our shed floors. The recommended pad size is 1/2" smaller than the footprint size since this allows the walls to hang 1/4" over the pad so the rain flows off the walls and away from the pad. Any pad size that is at least the recommended size or larger will also work no problem for building our sheds. It is critical that your concrete pad is both level and square in order for it to be constructed correctly. Many contractors will want to add a small slope to your pad so please make sure to mention that is must be level and square with no slope to ensure your new shed can be built properly. Please note, we do not pour concrete pads ourselves; however your shed can be built on a pre-existing pad or one that you have poured.


You need to select an item to continue

Flooring Options (101-150 sq ft)

Select if you would like your shed to be built on a wooden floor. The wooden floor is included in the price of the shed. You can also select if you would like your shed to be built on a pre-existing concrete pad that you currently have or plan to have poured. If you select this option you will receive a credit back for not requiring a wooden floor.




Our sheds come standard with 5/8” OSB Tongue and Groove Floor Sheeting. Select this option to upgrade to either 5/8” LP ProStruct with SmartFinish Treated Flooring or 3/4” Pressure Treated Plywood Flooring. This upgrade is highly recommended since the floor experiences the most wear and tear.


Our shed floors are built standard with 24” centered floor joists. 24” centered floor joists for example are ideal for withstanding weights inside the shed such as: a push lawn mower, bicycles and patio furniture. 16” Centered Floor Joists are recommended for storing weights such as: winter tires, electric scooters, small riding mowers and pool pumps. 12” Centered Floor Joists is our strongest floor joist configuration which is recommended for storing weights such as: an ATV, a motorcycle, a large riding mower, heavy tool boxes, files, or to set up your shed as a shop or office.


Our sheds come standard with 2"x6" pressure treated floor joists. Upgrading to 2"x8" floor joists is ideal for storing anything exceedingly heavy.


We offer floor joist hangers to help reinforce the floor to provide optimal strength. Adding floor joist hangers to each floor joist ensures maximum reinforcement so you can store weights such as: ATV's, heavy lawn tractors, motorcycles, rolling toolboxes and to set up your shed as a shop or office.


We offer floor insulation including 1/2” pressure treated plywood on the bottom, R22 6” Rockwool insulation centered in the middle and floor sheeting on top. Please note, this upgrade can only be installed before the walls are installed. We do not offer wall or ceiling insulation; we simply offer the flooring insulation since it can only be done once, when the shed is being built.

Please Note: Insulated floors are only built with 16” Floor Joist Centers, Pressure Treated 2x6 Floor Joists and 5/8” or ¾” Pressure Treated Plywood (Joist Hangers are not required with an insulated floor), if you have selected Insulated Floor, if needed we will change the quote to this configuration. It is also recommended to select Metal Doors with the insulated floor as they have a seal to hold the heat or A/C if you are planning to heat or cool your shed, our Wooden Doors have no seals. If you are upgrading to Metal Doors you will also have to select Upgrade Wall Height to 88” so as the door will fit on the Barn Shed, located in “Construction Upgrades” next section.


Our decorative lattice shed skirt can be added around the base of your shed where the foundation rises from the ground.
Note: Shed skirt does not include stones.



Select this option if you would like to add ground anchors to your shed. We use 36" double disc steel anchors to attach the four corners of your shed to the ground. Please note, this upgrade is not required in most situations.


Select this option if you would like to add a sill plate gasket seal with exterior base caulking to keep the moisture out.

Please see below for our recommended concrete pad sizes for building your shed on a concrete pad. The shed footprint is the actual size of our shed floors. The recommended pad size is 1/2" smaller than the footprint size since this allows the walls to hang 1/4" over the pad so the rain flows off the walls and away from the pad. Any pad size that is at least the recommended size or larger will also work no problem for building our sheds. It is critical that your concrete pad is both level and square in order for it to be constructed correctly. Many contractors will want to add a small slope to your pad so please make sure to mention that is must be level and square with no slope to ensure your new shed can be built properly. Please note, we do not pour concrete pads ourselves; however your shed can be built on a pre-existing pad or one that you have poured.


You need to select an item to continue

6'x4' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

6'x6' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

6'x8' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

Construction Upgrades (101-150 sq ft)



We offer a 16” centered wall stud upgrade from our standard 24” centered wall studs. This upgrade is recommended if you’d like to hang heavy items on the interior wall studs.


You can increase the height of your shed walls from our standard 72” side wall height up to a height of: 78”, 84”or 88”.
Please Note: If you are considering upgrading to Metal, French or Rollup Doors you will need to upgrade wall height to 88"
Click Here for Full Shed Height Information

We offer 16” centered roof trusses as an upgrade from our standard 24” centered roof trusses.


We offer 1/2" spruce plywood roof sheeting, which is an alternative to our standard 7/16” OSB roof sheeting.


- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge


- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge


- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge


- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge

Select this option if you’d like to add an interior wall to your shed. The interior wall is framed and one side is finished with Smart Side Paneling which is the same material as the exterior shed walls. The interior wall is constructed from the floor to ceiling. Ideal for change rooms, outdoor lockers or any need you have to divide the interior of your shed. The wall will run parallel with the front and rear of your shed (peak wall) on 24" centers. Please note, with this option you will need to add an additional door(s) for access from the exterior to interior of the shed or select interior wall with 30" door


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.

Our Barn style sheds come with one loft storage shelf, add a second loft shelf. This is for anyone in need of additional overhead storage.

This upgrade is available to upgrade the standard 2"x4" shelf joists for the interior loft shelf to 2"x6". This is a recommended upgrade for sheds that will be storing heavier items on the loft shelf.

You need to select an item to continue

Barn Shed Pricing & Quote


Please select the shed size that you require. All barn sheds include a 12"x12" fixed window above doors and a loft storage shelf Inside. In our shed descriptions the first number is the front wall where the door is located. For example our 8’x12’ Barn Shed the doors are located on the 8 ft. front wall. If you are looking for a custom sized shed you can request your preferred dimensions later in the quote process in the additional comment section.

Please note that this form is for shed pricing, information and quotes only. There is no obligation to purchase. We will email a final quote with all pricing and ordering information.
You need to select an item to continue

Door Options & Location (6' Front)

Included Door Options & Location


Pictured above is our standard door location for our 6' front barn shed with the included 30" single wooden door.


Select this option if you would like to upgrade the included 30" wooden door. Options include: a 36" single wooden door, 48” double wooden doors, 60” double wooden doors, 72" double wooden doors, a 36" metal door, 72” double metal doors, 72” French doors and a roll up door.
Please Note: If you are considering upgrading to Metal, French or Rollup Doors you will need to upgrade wall height to 88". This upgrade can be found one step back under “Construction Upgrades”. If you have not selected the wall height upgrade and choose Metal, French or Rollup Doors we will add the minimum 88” wall height upgrade to your quote.

This shed will include a 30" single wooden door on the 6' front wall of the shed. Select this option to move the door to the side walls of the shed.

You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".

Select if you would like the hinge on the left or right side of the door when looking at the door from the outside of the shed.


Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.


Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.

Additional Door or Set of Doors Options & Location

Select the below options if you would like to add a second door or set of doors to your shed.

Your shed includes one door or set of doors. Select this option if you would like to add a second door or set of doors to your shed. Please note that all door sizes may not be available depending on your shed size.

Where would you like the additional door or set of doors to be located on your shed?

Select if you would like the hinge on the left or right side of the additional door when looking at the door from the outside of the shed.

You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".


Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.


Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.

You need to select an item to continue

Door Options & Location (8' Front)

Included Door Options & Location


Pictured above is our standard door location for our 8' front barn shed with the included 60" double wooden doors.


Select this option if you would like to upgrade the included 60" double wooden door. Options include: a 36" single wooden door, 72" double wooden doors, a 36" metal door, 72” double metal doors, 72” French doors and a roll up door.
Please Note: If you are considering upgrading to Metal, French or Rollup Doors you will need to upgrade wall height to 88". This upgrade can be found one step back under “Construction Upgrades”. If you have not selected the wall height upgrade and choose Metal, French or Rollup Doors we will add the minimum 88” wall height upgrade to your quote.

This shed will include 60" double wooden doors on the 8' front wall of the shed. Select this option to move the doors to the side walls of the shed.

You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".

Select if you would like the hinge on the left or right side of the door when looking at the door from the outside of the shed.


Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.


Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.

Additional Door or Set of Doors Options & Location

Select the below options if you would like to add a second door or set of doors to your shed.

Your shed includes one door or set of doors. Select this option if you would like to add a second door or set of doors to your shed.

Where would you like the additional door or set of doors to be located on your shed?

Select if you would like the hinge on the left or right side of the additional door when looking at the door from the outside of the shed.

You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".


Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.


Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.

You need to select an item to continue

Door Options & Location (9' Front)

Included Door Options & Location


Pictured above is our standard door location for our 9' front barn shed with the included 60" double wooden doors.


Select this option if you would like to upgrade the included 60" double wooden door. Options include: a 36" single wooden door, 72" double wooden doors, a 36" metal door, 72” double metal doors, 72” French doors and a roll up door.
Please Note: If you are considering upgrading to Metal, French or Rollup Doors you will need to upgrade wall height to 88". This upgrade can be found one step back under “Construction Upgrades”. If you have not selected the wall height upgrade and choose Metal, French or Rollup Doors we will add the minimum 88” wall height upgrade to your quote.

This shed will include 60" double wooden doors on the 9' front wall of the shed. Select this option to move the doors to the side walls of the shed.

You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".

Select if you would like the hinge on the left or right side of the door when looking at the door from the outside of the shed.


Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.


Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.

Additional Door or Set of Doors Options & Location

Select the below options if you would like to add a second door or set of doors to your shed.

Your shed includes one door or set of doors. Select this option if you would like to add a second door or set of doors to your shed.

Where would you like the additional door or set of doors to be located on your shed?

Select if you would like the hinge on the left or right side of the additional door when looking at the door from the outside of the shed.

You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".


Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.


Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.

You need to select an item to continue

Door Options & Location (10' Front)

Included Door Options & Location


Pictured above is our standard door location for our 10' front barn shed with the included 60" double wooden doors.


Select this option if you would like to upgrade the included 60" double wooden door. Options include: a 36" single wooden door, 72" double wooden doors, a 36" metal door, 72” double metal doors, 72” French doors and a roll up door.
Please Note: If you are considering upgrading to Metal, French or Rollup Doors you will need to upgrade wall height to 88". This upgrade can be found one step back under “Construction Upgrades”. If you have not selected the wall height upgrade and choose Metal, French or Rollup Doors we will add the minimum 88” wall height upgrade to your quote.

This shed will include 60" double wooden doors on the 10' front wall of the shed. Select this option to move the doors to the side walls of the shed.

You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".

Select if you would like the hinge on the left or right side of the door when looking at the door from the outside of the shed.


Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.


Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.

Additional Door or Set of Doors Options & Location

Select the below options if you would like to add a second door or set of doors to your shed.

Your shed includes one door or set of doors. Select this option if you would like to add a second door or set of doors to your shed.

Where would you like the additional door or set of doors to be located on your shed?

Select if you would like the hinge on the left or right side of the additional door when looking at the door from the outside of the shed.

You can upgrade the height of our standard wooden shed doors. The height can be increased by 4" from 70" to 74".


Our diamond plate threshold is made of durable 17 gauge aluminum and is suitable for our wooden and roll up doors. This upgrade will simply help protect the floor edge at the door and shields the exposed floor from the outdoor elements.


Our entry ramps are perfect if you require rolling anything in or out of your shed. Made from pressure treated plywood. A heavy duty entry ramp is also available.

You need to select an item to continue

Flooring Options (0-64 sq ft)

Select if you would like your shed to be built on a wooden floor. The wooden floor is included in the price of the shed. You can also select if you would like your shed to be built on a pre-existing concrete pad that you currently have or plan to have poured. If you select this option you will receive a credit back for not requiring a wooden floor.




Our sheds come standard with 5/8” OSB Tongue and Groove Floor Sheeting. Select this option to upgrade to either 5/8” LP ProStruct with SmartFinish Treated Flooring or 3/4” Pressure Treated Plywood Flooring. This upgrade is highly recommended since the floor experiences the most wear and tear.


Our shed floors are built standard with 24” centered floor joists. 24” centered floor joists for example are ideal for withstanding weights inside the shed such as: a push lawn mower, bicycles and patio furniture. 16” Centered Floor Joists are recommended for storing weights such as: winter tires, electric scooters, small riding mowers and pool pumps. 12” Centered Floor Joists is our strongest floor joist configuration which is recommended for storing weights such as: an ATV, a motorcycle, a large riding mower, heavy tool boxes, files, or to set up your shed as a shop or office.


Our sheds come standard with 2"x6" pressure treated floor joists. Upgrading to 2"x8" floor joists is ideal for storing anything exceedingly heavy.


We offer floor joist hangers to help reinforce the floor to provide optimal strength. Adding floor joist hangers to each floor joist ensures maximum reinforcement so you can store weights such as: ATV's, heavy lawn tractors, motorcycles, rolling toolboxes and to set up your shed as a shop or office.


We offer floor insulation including 1/2” pressure treated plywood on the bottom, R22 6” Rockwool insulation centered in the middle and floor sheeting on top. Please note, this upgrade can only be installed before the walls are installed. We do not offer wall or ceiling insulation; we simply offer the flooring insulation since it can only be done once, when the shed is being built.

Please Note: Insulated floors are only built with 16” Floor Joist Centers, Pressure Treated 2x6 Floor Joists and 5/8” or ¾” Pressure Treated Plywood (Joist Hangers are not required with an insulated floor), if you have selected Insulated Floor, if needed we will change the quote to this configuration. It is also recommended to select Metal Doors with the insulated floor as they have a seal to hold the heat or A/C if you are planning to heat or cool your shed, our Wooden Doors have no seals. If you are upgrading to Metal Doors you will also have to select Upgrade Wall Height to 88” so as the door will fit on the Barn Shed, located in “Construction Upgrades” next section.


Our decorative lattice shed skirt can be added around the base of your shed where the foundation rises from the ground.
Note: Shed skirt does not include stones.



Select this option if you would like to add ground anchors to your shed. We use 36" double disc steel anchors to attach the four corners of your shed to the ground. Please note, this upgrade is not required in most situations.


Select this option if you would like to add a sill plate gasket seal with exterior base caulking to keep the moisture out.

Please see below for our recommended concrete pad sizes for building your shed on a concrete pad. The shed footprint is the actual size of our shed floors. The recommended pad size is 1/2" smaller than the footprint size since this allows the walls to hang 1/4" over the pad so the rain flows off the walls and away from the pad. Any pad size that is at least the recommended size or larger will also work no problem for building our sheds. It is critical that your concrete pad is both level and square in order for it to be constructed correctly. Many contractors will want to add a small slope to your pad so please make sure to mention that is must be level and square with no slope to ensure your new shed can be built properly. Please note, we do not pour concrete pads ourselves; however your shed can be built on a pre-existing pad or one that you have poured.


You need to select an item to continue

Flooring Options (150-180 sq ft)

Select if you would like your shed to be built on a wooden floor. The wooden floor is included in the price of the shed. You can also select if you would like your shed to be built on a pre-existing concrete pad that you currently have or plan to have poured. If you select this option you will receive a credit back for not requiring a wooden floor.




Our sheds come standard with 5/8” OSB Tongue and Groove Floor Sheeting. Select this option to upgrade to either 5/8” LP ProStruct with SmartFinish Treated Flooring or 3/4” Pressure Treated Plywood Flooring. This upgrade is highly recommended since the floor experiences the most wear and tear.


Our shed floors are built standard with 24” centered floor joists. 24” centered floor joists for example are ideal for withstanding weights inside the shed such as: a push lawn mower, bicycles and patio furniture. 16” Centered Floor Joists are recommended for storing weights such as: winter tires, electric scooters, small riding mowers and pool pumps. 12” Centered Floor Joists is our strongest floor joist configuration which is recommended for storing weights such as: an ATV, a motorcycle, a large riding mower, heavy tool boxes, files, or to set up your shed as a shop or office.


Our sheds come standard with 2"x6" pressure treated floor joists. Upgrading to 2"x8" floor joists is ideal for storing anything exceedingly heavy.


We offer floor joist hangers to help reinforce the floor to provide optimal strength. Adding floor joist hangers to each floor joist ensures maximum reinforcement so you can store weights such as: ATV's, heavy lawn tractors, motorcycles, rolling toolboxes and to set up your shed as a shop or office.


We offer floor insulation including 1/2” pressure treated plywood on the bottom, R22 6” Rockwool insulation centered in the middle and floor sheeting on top. Please note, this upgrade can only be installed before the walls are installed. We do not offer wall or ceiling insulation; we simply offer the flooring insulation since it can only be done once, when the shed is being built.

Please Note: Insulated floors are only built with 16” Floor Joist Centers, Pressure Treated 2x6 Floor Joists and 5/8” or ¾” Pressure Treated Plywood (Joist Hangers are not required with an insulated floor), if you have selected Insulated Floor, if needed we will change the quote to this configuration. It is also recommended to select Metal Doors with the insulated floor as they have a seal to hold the heat or A/C if you are planning to heat or cool your shed, our Wooden Doors have no seals. If you are upgrading to Metal Doors you will also have to select Upgrade Wall Height to 88” so as the door will fit on the Barn Shed, located in “Construction Upgrades” next section.


Our decorative lattice shed skirt can be added around the base of your shed where the foundation rises from the ground.
Note: Shed skirt does not include stones.



Select this option if you would like to add ground anchors to your shed. We use 36" double disc steel anchors to attach the four corners of your shed to the ground. Please note, this upgrade is not required in most situations.


Select this option if you would like to add a sill plate gasket seal with exterior base caulking to keep the moisture out.

Please see below for our recommended concrete pad sizes for building your shed on a concrete pad. The shed footprint is the actual size of our shed floors. The recommended pad size is 1/2" smaller than the footprint size since this allows the walls to hang 1/4" over the pad so the rain flows off the walls and away from the pad. Any pad size that is at least the recommended size or larger will also work no problem for building our sheds. It is critical that your concrete pad is both level and square in order for it to be constructed correctly. Many contractors will want to add a small slope to your pad so please make sure to mention that is must be level and square with no slope to ensure your new shed can be built properly. Please note, we do not pour concrete pads ourselves; however your shed can be built on a pre-existing pad or one that you have poured.


You need to select an item to continue

Construction Upgrades (0-64 sq ft)



We offer a 16” centered wall stud upgrade from our standard 24” centered wall studs. This upgrade is recommended if you’d like to hang heavy items on the interior wall studs.


You can increase the height of your shed walls from our standard 72” side wall height up to a height of: 78”, 84”or 88”.
Please Note: If you are considering upgrading to Metal, French or Rollup Doors you will need to upgrade wall height to 88"
Click Here for Full Shed Height Information

We offer 16” centered roof trusses as an upgrade from our standard 24” centered roof trusses.


We offer 1/2" spruce plywood roof sheeting, which is an alternative to our standard 7/16” OSB roof sheeting.


- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge


- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge


- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge

Select this option if you’d like to add an interior wall to your shed. The interior wall is framed and one side is finished with Smart Side Paneling which is the same material as the exterior shed walls. The interior wall is constructed from the floor to ceiling. Ideal for change rooms, outdoor lockers or any need you have to divide the interior of your shed. The wall will run parallel with the front and rear of your shed (peak wall) on 24" centers. Please note, with this option you will need to add an additional door(s) for access from the exterior to interior of the shed or select interior wall with 30" door


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.

Our Barn style sheds come with one loft storage shelf, add a second loft shelf. This is for anyone in need of additional overhead storage.

This upgrade is available to upgrade the standard 2"x4" shelf joists for the interior loft shelf to 2"x6". This is a recommended upgrade for sheds that will be storing heavier items on the loft shelf.

You need to select an item to continue

Construction Upgrades (151-180 sq ft)



We offer a 16” centered wall stud upgrade from our standard 24” centered wall studs. This upgrade is recommended if you’d like to hang heavy items on the interior wall studs.


You can increase the height of your shed walls from our standard 72” side wall height up to a height of: 78”, 84”or 88”.
Please Note: If you are considering upgrading to Metal, French or Rollup Doors you will need to upgrade wall height to 88"
Click Here for Full Shed Height Information

We offer 16” centered roof trusses as an upgrade from our standard 24” centered roof trusses.


We offer 1/2" spruce plywood roof sheeting, which is an alternative to our standard 7/16” OSB roof sheeting.


- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge

Select this option if you’d like to add an interior wall to your shed. The interior wall is framed and one side is finished with Smart Side Paneling which is the same material as the exterior shed walls. The interior wall is constructed from the floor to ceiling. Ideal for change rooms, outdoor lockers or any need you have to divide the interior of your shed. The wall will run parallel with the front and rear of your shed (peak wall) on 24" centers. Please note, with this option you will need to add an additional door(s) for access from the exterior to interior of the shed or select interior wall with 30" door


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.

Our Barn style sheds come with one loft storage shelf, add a second loft shelf. This is for anyone in need of additional overhead storage.

Our Barn style sheds come with one loft storage shelf, add a second loft shelf. This is for anyone in need of additional overhead storage.

You need to select an item to continue

Construction Upgrades (65-100 sq ft)



We offer a 16” centered wall stud upgrade from our standard 24” centered wall studs. This upgrade is recommended if you’d like to hang heavy items on the interior wall studs.


You can increase the height of your shed walls from our standard 72” side wall height up to a height of: 78”, 84”or 88”.
Please Note: If you are considering upgrading to Metal, French or Rollup Doors you will need to upgrade wall height to 88"
Click Here for Full Shed Height Information

We offer 16” centered roof trusses as an upgrade from our standard 24” centered roof trusses.


We offer 1/2" spruce plywood roof sheeting, which is an alternative to our standard 7/16” OSB roof sheeting.


- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge


- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge


- Overhang available with porch or as an overhang only with no porch
- 1’, 2’ and 3’ Overhangs include 45 degree supports
- 4’ and 6’ Overhangs include two 4”x4” posts
- 8’ and 10’ Overhangs include four 4”x4” posts
- Wooden porch floor is built with pressure treated plywood
- Includes shingles and drip edge

Select this option if you’d like to add an interior wall to your shed. The interior wall is framed and one side is finished with Smart Side Paneling which is the same material as the exterior shed walls. The interior wall is constructed from the floor to ceiling. Ideal for change rooms, outdoor lockers or any need you have to divide the interior of your shed. The wall will run parallel with the front and rear of your shed (peak wall) on 24" centers. Please note, with this option you will need to add an additional door(s) for access from the exterior to interior of the shed or select interior wall with 30" door


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.


We offer an eavestrough gutter with a downspout which can be added to one or both sides of your shed. Each side includes one downspout.

Our Barn style sheds come with one loft storage shelf, add a second loft shelf. This is for anyone in need of additional overhead storage.

This upgrade is available to upgrade the standard 2"x4" shelf joists for the interior loft shelf to 2"x6". This is a recommended upgrade for sheds that will be storing heavier items on the loft shelf.

You need to select an item to continue

Shed Painting


We offer a full shed painting service with your choice of paint colour. We can paint 1, 2, 3 or all 4 walls. If you have any hidden walls, we can paint them and return the remaining paint to you. Also, if you’d like the trim painted in white or a second alternate colour we can do that for you.


We offer a full shed painting service with your choice of paint colour. We can paint 1, 2, 3 or all 4 walls. If you have any hidden walls, we can paint them and return the remaining paint to you. Also, if you’d like the trim painted in white or a second alternate colour we can do that for you.


We offer a full shed painting service with your choice of paint colour. We can paint 1, 2, 3 or all 4 walls. If you have any hidden walls, we can paint them and return the remaining paint to you. Also, if you’d like the trim painted in white or a second alternate colour we can do that for you.

We use Benjamin Moore Premium Exterior Latex Satin Finish paint for our sheds. This paint will be added to your quote at a price of $85 per gallon. Most sheds will require 2 gallons and / or a separate gallon of paint for trim. All adjustments will be made on the quote we email. Any remaining paint will be returned to you for touch ups.

For shed painting you can select any colour of Benjamin Moore Exterior Paint with the exception of paint codes that begin with "CSP". You may choose a colour in person at a Benjamin Moore location or via Benjamin Moore’s website.

You need to select an item to continue

Windows


Our 12″x18″ opening window opens vertically with a screen and allows plenty of light to brighten the interior, while also allowing you the option to open the window to provide additional fresh air flow inside the shed. The window comes with matching trim.


Our 14″x27″ opening window opens vertically with a screen and allows plenty of light to brighten the interior, while also allowing you the option to open the window to provide additional fresh air flow inside the shed. The window comes with matching trim.


Our 14″x32″ opening window opens vertically with a screen and allows plenty of light to brighten the interior, while also allowing you the option to open the window to provide additional fresh air flow inside the shed. The window comes surrounded by a white vinyl trim.


Our 12″x12″ fixed windows always look elegant and allow some sunlight to help brighten the interior of the shed during the day. With a square classic design and trim; this window works well with any shed type.


Our thermal casement windows open with a screen and are a unique alternative to brighten the interior, while also allowing you the option to easily open the window to provide additional fresh air flow inside the shed.

If you know where you would like your casement window(s) located please let us know here.


Add an 18” or 24" wide white flower box beneath a window to showcase your plants and enhance the natural appeal of your shed. These flower boxes are ideal for smaller windows.


We offer PVC window shutter sets which are fixed to the shed. Please note, these shutters are decorative and do not open.


Our 14″x22″ bronze tinted skylight is made from superior poly-carbonate unbreakable material that works effectively to let in sunlight through the roof. The skylight can be installed on top of all of our sheds and provides an ample amount of sunlight to brighten the interior.

You need to select an item to continue

Accessories


Our adjustable wooden tool rack is ideal for hanging common garden tools. Includes adjustable wooden pegs which can slide side to side to maximize your storage space.


Our wooden interior shelves include two or three shelves hung with white brackets underneath; one shelf above another available in: 4', 6' or 8' by 13" deep sizes. These shelves are ideal for simple storage inside your shed.


Our 400 lumen 80 LED interior solar light illuminates the inside of your shed with motion detection or with the flick of a switch using the power of the sun. Includes the ability to charge even during unfavorable cloudy conditions to ensure lasting longevity. Includes a rechargeable battery and a roof mounted solar panel. The solar panel is water-resistant so you can ensure it will withstand the elements. A subtle wire connects the solar panel into the shed.


Our black exterior solar coach lights can be mounted anywhere on the front or side of the shed and soaks up the suns rays using the mini solar panels on top of the light itself. These decorative lights have an average operating time of 8 hours after a sunny day charge. With warm white LED lighting our solar coach light adds a sophisticated edge to any shed.


Our 120 lumens black exterior solar barn style lights can be mounted anywhere on the front or side of the shed. With a classic gooseneck design and adjustable pivot they add a great accent to any shed. The light is charged with an included solar panel that has a light sensor to turn the light on automatically at dusk. These decorative lights have an average operating time of 8 hours after a sunny day charge.


Our exterior solar floodlights use the power of the sun to charge the battery to produce ultra powerful outside light with a motion sensor. Available in three models with different brightness and mounting options. Includes a rechargeable battery. The roof mounted solar panel is water-resistant to ensure the solar panel will withstand the elements.


Our 16″x18″ cupola is white and copper coloured; designed to be installed on top of any shed. Our 24″ black metal rooster weathervane can be installed on top of any of our shed roofs.

You need to select an item to continue

Teardown and Removal

Select the type of shed you currently have that needs to be torn down and removed.

Please provide us with a short description of your pre-existing shed that you’d like to have torn down and removed, including the size (length, width & height).
Please note we do not do teardowns with finished interior walls, finished floors, or insulated walls. These would need to be removed and discarded for Shed In A Day to teardown and remove the actual shed.

Please attach at least 3 to 4 exterior and interior photos of your pre-existing shed that requires teardown and removal.

You need to select an item to continue

6'x10' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

6'x12' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

6'x14' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

6'x16' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

6'x18' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

8'x4' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

8'x6' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

8'x8' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

8'x10' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

8'x12' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

8'x14' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

8'x16' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

8'x18' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

9'x12' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

10'x4' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

10'x6' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

10'x8' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

10'x12' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

10'x14' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

10'x16' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

10'x18' Barn Shed - Install or Do It Yourself?






Drip edge is a highly recommended essential to prolong the life of your shed. We install the drip edge for you before we shingle the roof. The drip edge helps protect the roof edges from moisture and rotting over time.




A roof vent is a highly recommended essential to prolong the life of your shed. We install the roof vent for you before we shingle the roof. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.


Exterior caulking and interior soffit spray foaming helps keep unwanted insects, bees and wasps from nesting inside the shed.




3-tab 25 year pre-cut shingles can be supplied from us to help save you time and energy.




Our metal flashing is a highly recommended upgrade to help extend the life of your roof’s shingles. It installs on the 2 sides at the sub peak of the roof (See Picture). This will help prevent the shingles from blowing off the sub peak seam of the roof in extreme weather. The flashing is 12” wide and bent in the middle (6” each way).




Cinder blocks and gravel are available for your convenience.




Drip edge can be supplied by us for your convenience. The drip edge helps protect the roof edges from moisture and rotting over time.




Roof vents can be supplied by us for your convenience. The roof vent allows hot air to escape the roof of the shed which helps prevent your shingles from curling over time.



Shingle, Drip Edge & Roof Vent Colour


You need to select an item to continue

Customer Information & Submit Quote

The final estimated price is :

Beat The Rush Sale! Order any regular priced installed or do it yourself shed and save up to $700!
0-64 sq feet - Save $250
65-100 sq feet - Save $350
101-150 sq feet - Save $550
151+ sq feet - Save $700

The applicable discount will be automatically added to your quote.
50% Deposit must be received by March 21st, 2024.
Please note, there is a 20% fuel surcharge added to all delivery prices.

Please select your delivery location. If your location is not on the list please select "Other Area" and you can specify your location below.
Deliveries over 2.5 hours based on Google Maps from Dundas is a $50 surcharge.
Deliveries over 3 hours based on Google Maps from Dundas is a $100 surcharge.

Please specify the city or town you require delivery to.

If you have any questions or concerns about where you would like your shed built, please attach a few photos of the area you would like it located.

Please note that this form is for shed pricing, information and quotes only. There is no obligation to purchase. We will email a final quote with all pricing and ordering information upon submission of your quote.

Quote Summary

Description Information Quantity Price
Discount :
Total :
Scroll to Top